Sanyo VCC-9000EBCP/EBSP, Инструкция по эксплуатации

Страница: 27 / 49

- 26 - English
CAMERA SETTINGS
A
Sensitivity increase settings
(SENSE UP)
1 Press the MENU button.
2
Select “SENSE UP”, and then tilt the
joystick lever to
c
.
The “SENSE UP” setting will flash.
3
Tilt the joystick lever to
j
or
l
to select
the sensitivity, and then tilt it to
d
.
Available settings: OFF (Default setting), X2, X4, X8,
X16, X32
4 Select “BACK”, and then tilt the joystick
lever to
c
to complete the setting.
Note: (For both “SENSE UP” and “SHUTTER” settings)
• The SENSE UP function will not operate when the camera
is being used in manual iris mode.
• The “SENSE UP” and “SHUTTER” settings cannot both be
used at the same time. If you set a speed for “SHUTTER”,
then the “SENSE UP” setting will be automatically changed
to “OFF”.
• If “DAY NIGHT” is set to “AUTO”, the sensitivity up
(SENSE UP) function will only operate during
black-and-white monitoring. (VCC-9100P series only)
B
Shutter speed setting (SHUTTER)
1
Select “SHUTER”, and then tilt the joystick
lever to
c
.
The “SHUTTER” setting will flash.
2
Tilt the joystick lever to
j
or
l
to select
the shutter speed, and then tilt it to
d
.
You can make the setting display change continuously
by tilting the joystick lever continuously.
Available settings: OFF, X1, X2, X4, X8, X16,
X32 (zoom ratio),
50, 120, 250, 500, 1000, 2000,
4000, 10000 (seconds)
3
Select “BACK”, and then tilt the joystick
lever to
c
to complete the setting.
C
White balance settings
(WHITE BALANCE)
1 Select “WHITE BALANCE”, and then tilt the
joystick lever to
c
.
The “WHITE BALANCE” setting will flash.
2 Select “ATW”, and then tilt the joystick
lever to
c
.
Available settings: ATW, MWB
3
Select “BACK”, and then tilt the joystick
lever to
c
to complete the setting.
1 Select “WHITE BALANCE”, and then tilt the
joystick lever to
c
.
The “WHITE BALANCE” setting will flash.
2 Tilt the joystick lever to
j
or
l
to select
“MWB”, and then tilt it to
c
.
The manual white balance setting screen will be
displayed.
1
Select “MWB-R” or “MWB-B”, and then tilt the
joystick lever to
c
.
The setting will flash.
2
Tilt the joystick lever to
j
or
l
to change the
setting, and then tilt it to
d
.
You can make the setting display change continuously
by tilting the joystick lever continuously.
Available settings: 000–255
3
Select “BACK”, and then tilt the joystick
lever to
c
.
The display will return to the camera setting menu
screen.
SYSTEM INFORMATION
LENS
·CAMERA
PAN/TILT PARAMETERS
AUTO MODE
PRIVACY MASK
END
MENU
·SENSE UP :OFF
SHUTTER :OFF
WHITE BALANCE :ATW
BLC :OFF
BACK
SENSE UP :OFF
·SHUTTER :OFF
WHITE BALANCE :ATW
BLC :OFF
BACK
Setting automatic tracing white balance
(ATW)
Setting manual white balance (MWB)
SENSE UP :OFF
SHUTTER :OFF
·WHITE BALANCE :ATW
BLC :OFF
BACK
MWB-R : 064
MWB-B : 064
·BACK
(* ! "#$%&'