Sanyo VCC-9000EBCP/EBSP, Инструкция по эксплуатации

Страница: 25 / 49

- 24 - English
LENS SETTINGS
F
Iris level settings (IRIS LEVEL)
1 Select “IRIS LEVEL”, and then tilt the
joystick lever to
c
.
The “IRIS LEVEL” setting will flash.
2
Tilt the joystick lever to
j
or
l
to select
the iris level, and then tilt it to
d
.
Available settings: 000–100 (bright)
(Default setting: 040)
3 Select “BACK”, and then tilt the joystick
lever to
c
to complete the setting.
G
Day/Night settings (DAY/NIGHT)
(VCC-9100P series only)
1 Select “DAY/NIGHT”, and then tilt the
joystick lever to
c
.
The “DAY/NIGHT” setting will flash.
2 Tilt the joystick lever to
j
or
l
to select
the day/night operation, and then tilt it to
d
.
Available settings: AUTO, COLOR, B/W
(Default setting: AUTO)
3
Select “BACK”, and then tilt the joystick
lever to
c
to complete the setting.
NOTE:
• When the images are switched, a switching sound may be
heard from inside the main unit and the images may
become distorted for a brief moment, but this is normal.
• If using infrared illumination, monitoring may switch
automatically from black-and-white to color if a lot of light is
reflected from the object being illuminated. Set up the
infrared illumination in a place where it will not interfere with
monitoring.
• If “DAY/NIGHT” is set to “AUTO”, the sensitivity up
(SENSE UP) function will only operate during
black-and-white monitoring.
ZOOM SPEED :HIGH
EL ZOOM :OFF
JOYSTICK AUTO :BOTH
AUTO FOCUS :005
AUTO IRIS :005
·IRIS LEVEL :040
BACK
ZOOM SPEED :HIGH
EL ZOOM :OFF
JOYSTICK AUTO :BOTH
AUTO FOCUS :005
AUTO IRIS :005
IRIS LEVEL :040
·DAY/NIGHT :AUTO
BACK
( ! "#$%&'