Sanyo VCC-9000EBCP/EBSP, Инструкция по эксплуатации

Страница: 35 / 49

- 34 - English
AUTOMATIC MODE SETTINGS
NOTE: When the various automatic modes are being controlled from the system controller, the settings for the number that is
currently displayed in the menu settings will be carried out.
A
Preset position settings
(PRESET POSITION)
1 Press the MENU button.
2
Tilt the joystick lever to
j
or
l
to select
“AUTO MODE”, and then tilt it to
c
.
3 Setting a new preset position
Select “PRESET POSITION”, and then tilt
the joystick lever to
c
.
The preset position setting screen will be displayed.
4
Setting a preset number
1
Select “PRESET No.”, and then tilt the joystick
lever to
c
.
The “PRESET No.” setting will flash.
2
Tilt the joystick lever to
j
or
l
to set the number,
and then tilt it to
d
.
Available settings: 001–080
5 Setting a name
Select “TITLE”, and then tilt the joystick
lever to
c
.
The “TITLE” setting will flash.
6 Enter the preset position title.
Tilt the joystick lever to
j
or
l
to change each
character, and tilt it to
d
or
c
to move the flashing
cursor to a different position.
Tilt the joystick lever to d and hold it there until · is
displayed. This completes the setting.
Available settings: 0–9, A–Z, a–z, blank
7
Setting a preset position
1
Select “SETTING”, and then tilt the joystick lever
to
c
.
The “CALL PRESET 1 TO CONFIRM ......” screen will
be displayed.
Move the joystick lever to move the camera to the
preset position.
2
Press the “1” numeric button, and then press the
ENTER button.
The setting will be accepted.
Use the same procedure to select other preset positions.
8
Select “BACK”, and then tilt the joystick
lever to
c
to complete the setting.
1
Select “PRESET POSITION”, and then tilt
the joystick lever to
c
.
The preset position setting screen will be displayed.
2 After selecting the preset number, tilt the
joystick lever to
j
or
l
to select “SHOW
CURRENT”, and then tilt it to
c
.
The current preset position will be displayed.
3
Select “SHOW NEXT”, and then tilt the
joystick lever to
c
.
The position for the next preset number will be displayed.
4 Select “BACK”, and then tilt the joystick
lever to
c
to complete the setting.
SYSTEM INFORMATION
LENS
CAMERA
PAN/TILT PARAMETERS
·AUTO MODE
PRIVACY MASK
END
MENU
PRESET POSITION
SEQUENCE
TOUR
AUTO PAN
SET ZONE
FUNCTION IDLE:OFF
FUNCTION :OFF
·BACK
·PRESET No. : 001
TITLE: 0000000000000000
SETTING
SHOW CURRENT
SHOW NEXT
BACK
Checking a preset position
CALL PRESET 1 TO
CONFIRM......
ENTER
1
PRESET No. : 001
TITLE: 0000000000000000
SETTING
·SHOW CURRENT
SHOW NEXT
BACK
) ! "#$%&'