Sanyo VA-50LAN, Руководство по дистанционному управлению

Страница: 19 / 28

IMAGE TRANSFER SETTINGS
(“admin” only)
18 English
2
Configures the preferences for alarm recording
format.
• RESOLUTION
• QUALITY
Note:
When either [AUDIO INPUT] and/or [AUDIO
OUTPUT] are configured to “ON” on the [AUDIO
SETTINGS] screen, [RESOLUTION] cannot be
configured to 640 x 480.
3
Select the [BUFFER SIZE] option for specifying
the buffering capacity on the camera used for
recording the alarm image. According to the
option you selected, perform the following
settings:
One alarm image set containing both the pre-
and post-alarm images is stored in the camera,
and then the alarm image set is transferred one
by one to the FTP server.
Note:
Depending on the shooting conditions, the
number of images that are transferred will differ.
When the alarm is detected, only the post-alarm
images will be transferred to the FTP server at
the interval you specified in the [TX RATE]
setting. Transfer may not end within the set time
because communication speed may differ
depending on the network or FTP server
environment.
4 TIMER
Configures the operating conditions and camera ID
for timer transmission.
When timer transmission is configured, one image
at a time is automatically transmitted at the interval
that was set in [TX RATE].
• TIMER
Configures timer transmission as ON/OFF.
• CAMERA ID
This is inserted in the file name of
timer-transmitted images. It is also used as the
name of the folder created on the server side.
Note:
If the CAMERA ID is not configured, “sanyo” and
“timer” are substituted as the file name and
folder name respectively.
• OVERWRITE
Configures whether or not to overwrite file data
transmitted to the FTP server.
• TX RATE
Configures the image transmission interval.
5 [SET] button
After completing the settings, click this button to
confirm the settings.
MEMO:
The file names of alarm recording images are
composed as follows.
File name = Camera ID_date and time information
(yymmddhhmmss)_4-digit serial extension (.jpg)
When [OVERWRITE] is configured to “ON”, date and
time information is not displayed.
When the [BUFFER SIZE] setting is set
from “0.5MB to 8MB”
PRE/
POST
Configures the recording capacity ratio
between the pre- and post-alarm
image recordings.
RATE
Configures the recording rate for the
alarm image.
When the [BUFFER SIZE] setting is set to
“OFF”
DURATION
Specifies the duration of each
alarm image to transfer (During
this duration, no other alarms
can be processed for transferring
the alarm image).
TX RATE
Configures the interval for
transferring the alarm image
(Select a value shorter than the
[DURATION] setting).
OFF
Stores all files without conducting
overwrite (date and time information is
displayed in the file name).
ON
Overwrites (date and time information
is not displayed in the file name).