
Adjusting the Phone’s Volume Settings
To change the ringer/ key volume:
1. Press MENU/OK to access the main menu.
2. Select
Settings and press MENU/OK.
3. Select
Sounds and press MENU/OK.
4. Select
Ringer/Key Vol., and press MENU/OK.
5. Select Ringer Volume, Calendar/Alarm, Start-up/Pw-off or Key Beep and press MENU/OK.
6. Select your desired volume level and press MENU/OK.
To Adjust Earpiece or Speaker volume:
1. Press MENU/OK to access the main menu.
2. Select
Settings and press MENU/OK.
3. Select
Sounds and press MENU/OK.
4. Select
either
Receiver Vol. and press MENU/OK.
5. Select
Earpiece or Speaker and press MENU/OK.
6. Select your desired volume level and press MENU/OK.
Tip: You can adjust the ringer volume in standby mode by using the Side Up/Down key, and
adjust earpiece volume during a call by using the navigation key up or down or Side Up/Down
key.
Alert Notification
Your phone comes with several different options to keep you aware of what’s going on by
sounding the alert or ringer.
Service sets alert On or Off for network services parameter changes.
Ready Link sets an alert to notify you of Ready Link calls.
Voicemail sets alert to notify you of caller’s messages.
Messaging sets alert to notify you of text messages.
Minute Beep sets a minute reminder that beeps ten seconds before the end of each minute
during a call.
Signal Fade sets alert to notify you when your phone loses a signal during a call.
To set the alerts:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Sounds and press MENU/OK.
4. Select Alerts and press MENU/OK.
5. Select your desired option and press MENU/OK.
Tip: Repeat Alert sounds every two minutes for twenty minutes.
Silence All
There may be times when you need to silence your phone entirely. The phone’s Silence All
option allows you to mute all sounds without turning your phone off:
To activate Silence All:
22
Содержание SCP-3100
Страница 1: ...SCP 3100 Operating Guide Draft ...