PLC-HP7000L Expand Serial Command Functional Specifications
13/94
5.4 Screen Control Command Table
Execute command
Item
CF_SCREEN_%1 [CR]
Select Screen size
CF_DZCENT _%1 [CR]
Cancel Digital Zoom mode
CF_VSCALE_%1[CR]
Set V Scale
CF_VPOS_%1[CR]
Set V Position
CF_HSCALE_%1[CR]
Set H Scale
CF_HPOS_%1[CR]
Set H Position
CF_KEYSTONE _%1 [CR]
Set Keystone correction
CF_KYSTNMODE _%1 [CR]
Set Keystone store mode
CF_CORNER-UL_%1[CR]
Correct top-left corner
CF_CORNER-UR_%1[CR]
Correct top-right corner
CF_CORNER-DL_%1[CR]
Correct bottom-left corner
CF_CORNER-DR_%1[CR]
Correct bottom-right corner
CF_CORNERTESTPAT_%1[CR]
Select test pattern for Corner correction.
CF_CEIL_%1 [CR]
Set ON/OFF of Ceiling
CF_REAR_%1 [CR]
Set ON/OFF of Rear
CF_SCREENASPECT_%1 [CR]
Set Screen aspect function
5.5 Lamp Command Table
Execute command
Item
CF_LAMPH_%1[CR]
Reset total running time for each lamp
CF_LAMPMODE_%1 [CR]
Select Lamp mode
5.6 Setting Command Table
Execute command
Item
CF_LANG_%1 [CR]
Select language for OSD
CF_MENUPOSITION_%1 [CR]
Select the position of the On-Screen Menu.
CF_MENUSIZE_%1[CR]
Set Menu size
CF_INPUTBUTTON_%1[CR]
Set up Input search function
CF_DISP_%1 [CR]
Set ON/OFF of On Screen Display
CF_BACKGND_%1[CR]
Select screen for no signal
CF_LOGO_%1 [CR]
Set PIN code and mode for Logo
CF_PIP_%1[CR]
Set “Picture in Picture”
CF_PIPMODE_%1[CR]
Set mode of “Picture in Picture”
CF_PIPMAININP_%1_%2[CR]
Select Input and Source for “Picture in Picture”
(Main picture)
CF_PIPSUBINP_%1_%2[CR]
Select Input and Source for “Picture in Picture”
(Sub picture)
CF_PIPSIZE_%1_%2[CR]
Set picture size in “Picture in Picture”
CF_PIPPOSITION_%1[CR]
Set position in “Picture in Picture”
CF_PIPFRAMELOCK_%1[CR]
Set Frame lock in “Picture in Picture”
CF_PIPSTORE_%1[CR]
Store current status in “Picture in Picture” to User1-5
CF_PIPMODEFREE_%1[CR]
Clear registration value in User %1 and return to state of
Free.
CF_PIPRST_%1[CR]
Reset setting of “Picture in Picture”
CF_EDGEBLENDING_%1[CR]
Set Edge blending
CF_BLEND_%1_%2[CR]
Set the value of Width for Edge blending
CF_BLENDSTART_%1_%2[CR
]
Set the value of Start (Left/Right/Top/Bottom) for Edge
blending
CF_BLENDBLK_%1_%2[CR]
Set Black level(R/G/B) for Edge blending
CF_BLENDBLKALL_%1_%2[C
R]
Set Black level(ALL) for Edge blending
CF_BLENDTESTPAT_%1[CR]
Set Test pattern for Edge blending
CF_BLENDRST_%1[CR]
Reset Edge blending
