The sensing sensitivity can be set in nine levels (Level 1 to 9).
Higher the sensitivity level, lower the sensing sensitivity.
When [User defined] is selected:
The [Add] button becomes selectable, allowing you to define the sensing area as desired.
In the preview area, click in the grid cell where you want to enable sensing.
Each time you click, the color of the selected grid cell toggles between red and blue to indicate that sensing is enable or disabled, respectively.
Click
to discard all sensing area settings.
When [Full region] is selected:
The whole screen is set as the sensing area.
The whole preview area is enclosed with a red border to indicate that full-region sensing is enabled.
Clicking
switches the screen to the [User defined] mode.
The [Select linked alarm from camera] setting dialog box appears.
Clicking an Alarm OUT number turns On the alarm output from the corresponding terminal. You can turn On the alarm output for more than one terminal.
Click the terminal number again to turn Off the alarm output.
: Turns On the alarm output for all Alarm OUT numbers.
Reset
Reset
All Alarm
129/182
ページ
2008/10/27
