Figure 3.6.1.1
(Figure 3.6.1.1: Enable SES in LUN 0, and can be accessed from every host)
The SES client software is available at the following web site:
SANtools:
http://www.santools.com/
3.6.2 Hardware monitor
“Hardware monitor”
can view the information of current voltage and temperature.
Figure 3.6.2.1
If
“Auto shutdown”
has been checked, the system will shutdown automatically when voltage or
temperature is out of the normal range. For better data protection, please check
“Auto Shutdown”
.
For better protection and avoiding single short periods of high temperature triggering auto shutdown,
controllers use multiple condition judgments for auto shutdown, below are the details of when the Auto
shutdown will be triggered.
Advanced operation
41
