The following is LCM menu hierarchy.
Sans Digital
▲▼
[Alarm Mute]
[
▲Yes No▼
]
[Reset/Shutdown]
[Reset]
[
▲Yes No▼
]
[Shutdown]
[
▲Yes No▼
]
[Quick Install]
RAID 0
RAID 1
RAID 3
RAID 5
RAID 6
RAID 0+1
xxx GB
[Volume Size]
xxx GB
Adjust Volume Size
[Apply The Config]
[
▲Yes No▼
]
[View IP Setting]
[IP Config]
[Static IP]
[IP Address]
[192.168.010.050]
[IP Subnet Mask]
[255.255.255.0]
[IP Gateway]
[192.168.010.254]
[Change IP Config]
[DHCP]
[
▲Yes No▼
]
[Static IP]
[IP Address]
Adjust IP address
[IP Subnet Mask]
Adjust Submask IP
[IP Gateway]
Adjust Gateway IP
[Apply IP Setting]
[
▲Yes No▼
]
[Reset to Default]
[
▲Yes No▼
]
Notice : Before power off, it is better to execute
“Shutdown”
to flush the data from cache to physical disks.
2.4.2 System buzzer
The system buzzer features are listed below:
1. The system buzzer alarms 1 second when system boots up successfully.
2. The system buzzer alarms continuously when there is error occurred. The alarm will be stopped after
error resolved or be muted.
3. The alarm will be muted automatically when the error is resolved. E.g., when RAID 5 is degraded
and alarm rings immediately, user changes/adds one physical disk for rebuilding. When the
rebuilding is done, the alarm will be muted automatically.
2.4.3 LED
The LED features are listed below:
1.
Marquee / Disk Status / Disk Rebuilding LED
: The Marquee / Disk Status / Disk Rebuilding LEDs
are displayed in the same LEDs. The LEDs indicates different functions in different stages.
Web GUI guideline
15
