SanRex SANARG 200AP, Руководство оператора

Страница: 53 / 90

53
6.2 AC OR DC HF TIG WELDING
•
Connect work lead to positive terminal
•
Connect TIG torch to negative terminal
•
Switch machine on
•
Set AC or DC weld current. If AC is selected then set AC FREQ & WAVE
BALANCE
•
Connect remote control device if required
Use the Scroll Buttons to move to the parameter to be set. The LED will show which
function is being adjusted on the weld sequence graph. Use the control knob to adjust
each parameter.
•
Set PRE-FLOW time
•
Set HOT START current
•
Set POST-FLOW time
•
Set (WELD) PEAK CUR current
•
Set POST-FLOW time
Slope Mode Parameters if required
•
Set INTIAL CUR current
•
Set UP SLOPE time
•
Set (WELD) PEAK CUR current
•
Set BASE current
•
Set DOWN SLOPE time
•
Set CRATER CUR current
Pulse Mode parameters if required
•
Set PULSE WIDTH % for PEAK CURRENT
•
Set PEAK CURRENT
•
Set PULSE FREQ
•
Commence welding