SanRex SANARG 200AP, Руководство оператора

Страница: 40 / 90

40
3. Positive Output Terminal
Welding current flows from the Power Source via heavy duty Dinse type terminal. It is
essential, however, that the male plug is inserted and turned securely to achieve a sound
electrical connection. A loose or worn connection will cause excessive heat and may cause
damage to the front frame or internal components of the welding unit.
4. Negative Output Terminal
Welding current flows from the Power Source via heavy duty Dinse type terminal. It is
essential, however, that the male plug is inserted and turned securely to achieve a sound
electrical connection. A loose or worn connection will cause excessive heat and may cause
damage to the front frame or internal components of the welding unit.
Loose welding terminal connections can cause overheating and result in the
male plug being fused in the bayonet terminal and /or melting of the housing
(case) and /or internal components of the welding unit.
5. GAS OUTLET
The Gas Outlet is a 5/8 18 UNF female gas fitting.
6. ON/OFF Switch
This switch connects the Primary supply voltage to the inverter when in the ON position. This
enables the Power Supply.
WARNING:
When the welder is connected to the Primary supply voltage, internal
electrical components maybe at 500V potential with respect to earth
.