Sangean DDR-60BT, Руководство пользователя

Страница: 15 / 27

GB
14
Clock and Alarms
Automatically updating the clock
Your radio will normally update the clock automatically using the DAB or FM signal. If no signal
is available, then you need to set the time manually.
After a power failure the radio will then set its clock the next time that you turn on the radio in
DAB or FM mode. Alternatively you may specify that the time is not automatically updated. In this
case the clock must always be set manually after a power interruption.
1. With your radio switched on, press and hold the Menu button to access the menu for the
current mode.
2. Rotate the Tuning control until ‘System ‘ is highlighted on the display. Press the Tuning control
to enter the system settings menu.
3. Rotate the Tuning control until ‘Time’ is highlighted on the display. Press the Tuning control to
enter the time setting menu.
4. Rotate the Tuning control until “Auto update” is highlighted on the display. Press the Tuning
control to enter the auto-update menu.
5. Rotate the Tuning control to choose an update option from ‘Update from DAB’, ‘Update from
FM’, ‘Update from Any’ or ‘No update’ as required. Press the Tuning control to confirm your
choice. The radio will then exit to the previous menu display.
Note:
If you select ‘Update from Any’, ‘Update from DAB’, ‘Update from FM’ the current time received
will be displayed. If no signal is found you should either position the radio or its aerial so that a
signal can be received, or revert to manual clock mode.
DAB
<System >
System
<Time >
Time
<Auto update >
Auto update
<Update from DAB >
Auto update *
<Update from Any >