Sangean DDR-60BT, Руководство пользователя

Страница: 14 / 27

13
Pairing and playing your device via NFC
Your radio is equipped with wireless NFC (Near Field Communication) feature, allowing NFC-
enabled devices to pair and play the music with your DDR-60BT. For non-NFC devices, please
refer to the above sections for standard Bluetooth pairing.
1. Turn on the NFC feature on your device.
2. Touch the NFC area of your playing device directly against the NFC tag marked on the top of
your DDR-60BT. The radio will automatically be switched on and connect your NFC-enabled
device. If you pair with radio for the first time, some NFC-enabled device will be asked the
permission to link with the radio. Once paired with a device, ‘Connecting DDR-60BT…’ or a
similar message is shown on your NFC-enabled device. The Bluetooth indicator will light in
solid blue. (
Important: Please make sure the screen of your playing device is on and unlocked
to allow NFC to work.)
Note:
1. NFC connectivity performance may vary depending on the connected Bluetooth devices.
Please refer to the Bluetooth capabilities of your device before connecting to your radio. All
features may not be supported on some Bluetooth/NFC enabled devices.
2. The location of the NFC detection area is not the same on all devices. When connecting
with other Bluetooth device via NFC, refer to the User guide of the other device for more
information.
3. Some of metallic case or cover for mobile phones may reduce the sensitivity of NFC. Make
sure you remove it, before activating the NFC.
Disconnecting your NFC-enabled device
To disconnect your device, simply touch directly against the speaker’s tag again on the top panel.
The Bluetooth indicator on the front panel flashes blue to show the speaker is discoverable.