manualshive.com logo in svg

SanDisk CompactFlash, Руководство по эксплуатации продукта

Поделиться
Скачать
SanDisk CompactFlash Скачать руководство пользователя страница 105

Ordering Information and Technical Support

SanDisk CompactFlash Memory Card Product Manual © 1998 SANDISK CORPORATION

105

Technical Support Services

Direct SanDisk Technical Support

Call SanDisk Applications Engineering at 408-542-0400 for technical support.

SanDisk On-line Services

SanDisk Worldwide Web Site

Internet users can obtain technical support and product information along with SanDisk news and much
more from the SanDisk Worldwide Web  Site,  24  hours  a  day,  seven  days  a  week.  The  SanDisk
Worldwide  Web  Site  is  frequently  updated.  Visit  this  site  often  to  obtain  the  most  up-to-date
information  on  SanDisk  products  and  applications.  The  SanDisk  Web  Site  URL  is
http://www.sandisk.com.

Compuserve

You can ask questions, share ideas and contact SanDisk technical support directly via Compuserve—the
world’s most comprehensive on-line information service. In addition, the SanDisk support section in the
PC Vendor Forum details additional on-line services provided by Compuserve. (Enter GO SANDISK.)
As a SanDisk customer, you’re entitled to a free introductory membership  to Compuserve, including:

• One month of free basic services.
• A $15 introductory usage credit to explore the SanDisk Support Section of the PC Vendor Forum.
• A private user ID and password.
• A  complimentary  subscription  to  Compuserve  Magazine,  Compuserve’s  monthly  computing

publication.

If you’re interested in becoming a member of Compuserve, call 800-524-3388 and ask for representative
#194.

Содержание CompactFlash



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды