22 S&C Instruction Sheet 461-504
Using TripSaver
®
II Service Center Configuration Software Version 1.8
Connected Mode
The software enters the
Connected
(online) mode when a communications connection is
established with a TripSaver II recloser. When connected, the setpoints from the recloser
will be placed into the edit buffer, overwriting all previous settings in the buffer. When
the present settings in the buffer have not been saved, a prompt to save the settings will
open before connecting to the recloser.
Under
Connected
mode, one can view existing settings, status informa-
tion, and event logs of the TripSaver II recloser, apply new settings to the
control, download a snapshot file, or perform functional tests. Three addi-
tional screens are available under this mode. They are: 1)
Status,
2)
Event
Logs,
and 3)
Functional Test
. See Figure 24. And as follows, the 4)
R-NR Functions
screen, 5)
Gateway Drop Open
screen, and 6)
DNP Remote Drop Open
screen, will
open if the TripSaver II recloser has the
Extended Open Interval
option (“-O”). These
screens are also available when a snapshot file is open.
The software also allows viewing the data captured in a previously saved
snapshot file.
Figure 24. The Connected mode menu tree items.
