64 S&C Instruction Sheet 461-504
Using TripSaver
®
II Service Center Configuration Software Version 1.8
LCD Screen Settings Screen—General
The TripSaver II recloser uses a non-volatile liquid-crystal-display (LCD) to show various
status and operational information. The screen has two operating modes:
Normal
screen
and
Display
screen. The LCD shows the
Normal
screen most of the time. The
Display
screen parameters may be viewed by toggling the mode selector. TripSaver II reclosers
will scroll through the user-configurable
Display
screen items the specified number of
times before the screen returns to the
Normal
screen.
Use the
LCD Screen Settings
screen to select the desired screens from a list of
available LCD Display screen items. See Figure 93.
Figure 93. The LCD Screen Settings screen.
Invert Screen When Dropped-open
(checkbox)
.
Select this checkbox to invert the LCD
screen when the connected TripSaver II recloser is in the
Dropped-Open
(horizontal)
position. The inverted display is easier to read from the ground when a TripSaver II
recloser is in the
Dropped-Open
position. See Figure 93.
Screen When Dropped-open.
Select from the list the desired screen to display after a
Drop-Open event. See Figure 93.
See Appendix B on page 99 for the available options.
Language.
Select from the list the display language for the LCD screen. (
Note:
This is
not the language for the configuration software.) The following languages are supported:
English, Spanish, Portuguese, French, Chinese, and Arabic. See Figure 93.
Normal Screen.
Select from the list. Two
Normal
screen options are available.
The
Normal
screen is the screen that displays most of the time. See Figure 93 and
Table 1 on page 65.
LCD Screen Settings
Screen
