Samyung SUPERTRACK SDA-390 Скачать руководство пользователя

Страница: 21 / 68

Use this button when you want to scroll right (

▶

) in the menu.

4. M/C button – Press M/C for more than 3 seconds to enter computer link via RS

232. When you want to escape from computer link, press M/C for more than 3

seconds. This button is also used to scroll up (

▲

) in the menu.

5. SEARCH button – Press SEARCH for more than 3 seconds to re-search for the

current satellite. This button is also used to scroll down (

▼

) in the menu.

6. PWR button (Power button) – Use this button when you want to turn on/off the

antenna unit power.

7. TRACK LED – Blinking indicates that the antenna is searching for the satellite.

ON indicates that the antenna is tracking the satellite.

OFF indicates that the antenna is in the stall mode or initializing.

8. GPS LED – Blinking indicates that the antenna has distinguished the GSP but that

the GPS data is invalid.

ON indicates that the antenna is receiving valid GPS data.

OFF indicates that the GPS antenna is not installed or is malfunctioning.

9. DiSEqC LED – Blinking indicates that DiSEqC option is selected as 22KHz

tone.

ON indicates that the DiSEqC option is selected as DiSEqC 1.2 to switch satellites

automatically.

OFF indicates that the DiSEqC option is disabled. Press the NEXT button to select

the next satellite manually.

10. ERROR LED – ON indicates that one or more discrete system errors have occurred.

(Refer to Error Code)

OFF indicates that no errors have occurred.

Содержание SUPERTRACK SDA-390





































































Результаты поиска

Содержание SUPERTRACK SDA-390

Отзывы:

Похожие инструкции для SUPERTRACK SDA-390

Бренды по названию

Популярные бренды

Samyung SUPERTRACK SDA-390, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SUPERTRACK SDA-390

Отзывы:

Похожие инструкции для SUPERTRACK SDA-390

Бренды по названию

Популярные бренды