background image

 

Installation and Operation Manual 

49 

  5-3 Communication setup 

When this equipment is connected to marine communication equipments through compatible 
NMEA equipment, you can use this function.   
 
You can use as follows. 

1 Push 

 

long. 

2 Select communication icon.   
 
 
 
 
 
 

5-3-1 NMEA 2000                                                     

Communication with other equipments by 
NMEA 2000 method. 

• 

NMEA 2000 output

: Select, if you want to 

output data. 

• 

NMEA 2000 PGN

: User select the data 

item, which he wants to output   

• 

View

: You can check data, output in real-

time. 

 
5-3-2 NMEA 0183-Port 1                                       

Communication with other equipments by 
NMEA 0183 method. 

• 

NMEA 0183 output

: Select, if you want to 

output data. 

• 

NMEA 0183 speed

: You can set up the 

speed of data output. 

• 

NMEA 0183 selection

: User select the 

data item, which he wants to output 

• 

View

: You can check data, output in real-

time. 

   
   

5-3-3 NMEA 0183-Port 2                                       

This is used exclusively for AIS, always output 
AIS message.   

• 

View

: You can check data, output in real-

time. 
 

 

 

 

 

Installation and Operation Manual 

50 

  5-4 GPS Settings 

To go to the GPS settings:   
1 Press and hold 

2 Select the 

GPS

 icon.   

 
 
 
 
 
 
 
 
 
 
 
 
When the GPS device is connected properly, the GPS settings provide the access to GPS 
functions and features connected with the satellites information used for further navigation.   

5-4-1 GPS Source                                                     

Select a source of GPS signals   

Internal: 

Select this option when uses the 

internal GPS.   

NMEA0183 & NMEA2000:

 Select this 

option when using an external GPS or DGPS 
antenna via NMEA.   

 
5-4-2 DGPS Source                                                 

Select WAAS/EGNOS when you want to 
utilize DGPS. 

 
5-4-3 Static Navigation                                         

This option is very useful when the boat 
stops or moves very slowly. This option 
allows you to set a minimum speed at which 
movement is assumed. The value range is 
from 0.00 to 9.99.   
 

5-4-4 Speed Filter and Course Filter                 

Occasional waves and wind at sea affect the 
boat speed and course. In order to have 
stable boat speed and course, the unit 
calculates these factors to give the value of 
stable speed and course information. 
 

5-4-

5 Lat/Lon d.p’s                   

                             

Select number of last digit of Lat/Lon to be 
sent to other marine electronics.   

 
5-4-6 Ship speed                                                       

To have more precise boat speed and course, 
you can select your boat speed. Mid is highly 
recommended option for the most of 
common boat.   

 
5-4-7 Magnetic Variation                                       

This option compensates the difference 
between true north and magnetic north. 

 

 

 

 

Содержание AIS-50N



































Отзывы: