WEA453e Installation Manual
Version 1.0
Samsung Electronics America
Page
97
of
117
ANNEX A.
Connector Assembly
A.1
RJ-45 (Shield Type)
Procedure that assembles the RJ-45 (shield type) connector is as follows:
Figure 66.
Assembling the RJ-45 Connector (Shield Type) (1)
1), 2) Prepare work tools and materials.
4) Pass the cable through the RJ-45
cap.
5) Remove the coating 17 mm from
the end.
6) Push the shield backward, and
cut the aluminum shield.
7) Cut the shield leaving a 5 mm of
it.
8) Arrange the cable in reference to
the pin map.
9) Cut the cable to make it 12 mm
long.
3) Pass the cable through the
marking tube.
1
2
3
4
5
6
7
8
9
