58
/
66
Picture 6
4. If a module is not lit, the socket of the module may be too loose to be powered. (As
shown in Picture 7)
Picture 7
5. If one or several lines of the module are not lit, the tube may be damaged.
6.
If the module shows a lack of color, it may be 245 soldered or damaged.
C. Cabinet Failure
:
Then check whether the indicator on the back of the cabinet is abnormal or not, check
the HUB board, upgrade or replace the receiving card. As shown in Picture 1
below
.
Содержание VMR-O P3.9
