Samsung VMR-O P3.9, Руководство по эксплуатации продукта

Страница: 22 / 66

22 / 66
3. Start installing the cabinet. After ensuring that the base beam is flat, gently place
and lock each cabinet. Each time a cabinet is erected, a cabinet is lit immediately to
check if any dead lights, obvious bright lines, and flatness. When a cabinet is stacked
on the other, immediately locked the connecting piece, and connect the cabinet to the
stacking bracket via bracket connector, as shown in Fig. 6-8(1)(2); 2) shown. Plug in
the power cable and signal cable into socket of the cabinet, a “crispy” sound after
plugging indicates good connection.
Picture 6-8
（
1
）
Rotate the left and right lock levers of the lock cabinet in the direction
of the cabinet mark
Picture 6-8
（
2
）
Bracket Connector
4. Repeat Step 3
，
Until the entire screen is installed. Refer to Chapters 7 and 8 for the
steps to debug the display.