28
/
66
②
Main power cord
③
Cabinet power cable
Picture 7-2
Power cable connection diagram
7.3 Signal cable connection
7.3.1 Sending box
:
The sending box contains a sending card to send video data to the display.
7.3.2 Main Signal Cable
:
Send the main signal cable between the cabinet and the display screen to transmit
video data with a length of less than 70m.
Remarks: When the transmission distance is greater than 70m, it is possible to
transmit data by optical fiber, and the longest distance is 20 kilometers.
Cabinet signal cable: used for signal transmission between cabinets.
7.3.3 Display Signal cable connection
:
1. Install the sending box, arrange the main signal, and put it next to the display
installation position.
2. Install the cabinet, refer to Chapter 6.
3. After the cabinet is installed, connect the signal wires according to the design
drawings.
Picture 7-3 shows the signal cable connection of the VMR-O P3.9 15*8 arrangement.
Содержание VMR-O P3.9
