NETWORK CAMERA
User Guide
4
NETWORK CAMERA
User Guide
5
Caution
Using the Product
· Opening or removing the product case will expose you to the risk of electric shock; do not open
or remove the case unless you are a qualified technician.
· Please keep the product within the recommended temperature and humidity range.
· To prevent electrical fire, do not connect multiple power cords to a single outlet.
· Do not place heavy objects or vessels containing water on the unit since it can cause serious
malfunctions.
· Do not install the product in a location where it may be exposed to extreme heat or cold.
· Using the product in extremely hot (over 50ºC) or extremely cold (under -10ºC) environments
may degrade picture quality and/or cause product malfunctions.
· Do not install the product in areas with flickering illumination. Severe fluctuations in ambient
luminance, such as flickering of old fluorescent lights, may cause the product to malfunction.
· Do not drop the camera or subject it to physical shock. It may damage the product.
· Do not drop the camera or subject it to physical shock. It may damage the product.
· Avoid touching the camera lens. It is the most important component of your product. Be careful
not to smear it with fingerprints.
· Do not install the camera where it may be exposed to rain, water, and/or radioactivity. Water may
enter the product and cause malfunctions.
· Do not open or disassemble the product. Opened or disassembled products are not covered by
the warranty.
· Inspect your network environment before connecting the camera to the network.
· Do not use power adapters other than the one that is provided with the camera.
· Please review local, state, and federal information security laws before using this product as
part of your security system.
Warning Symbols
Warning Symbols
· Do not use this item in a location containing propane gas, gasoline, or other flammable
substances to avoid risk of explosion or fire.
· To avoid the risk of electric shock, do not touch the power plug with moisture on your hands.
· Do not pull on the power plug with any force; a damaged plug may cause electric shock or fire.
· Do not force an RJ-45 cable into the product connection port when connecting to a network.
· Stop using the product immediately if smoke or an unusual amount of heat is emanating from
your camera. Failure to do so may result in fire.
· To avoid the risk of an explosion, the internal Lithium battery must be replaced only with an
identical, or a fully compatible, product. The internal lithium battery requires specialized skills for
replacement; it must be replaced by a technician, not by the user. For assistance, please contact
our service center. Obsolete batteries must be properly retired or recycled to protect the
environment.
· Do not expose the battery to heat or place it in fire; short-circuiting or disassembling the battery
is also hazardous.
· Do not recharge the battery.
Disassembly and Cleaning
· There is a risk of malfunction, shock, and other dangers. Do not disassemble or attempt to fix or
alter the product yourself.
· Do not clean the product with water, paint thinner, or other organic solvent as doing so may
cause product malfunctions and/or electric shock. When cleaning the product, use a dry cloth to
wipe the exterior of the device.
Warning
Installing the Product
· Please check the power outlet voltage before you connect the power to the outlet.
· Make sure that the product is switched off before you install it.
· There is a risk of shock or fire; be sure to avoid setting up in places with high humidity.
· The product must be grounded to reduce the risk of electric shock.
· Self-installation of this product is prohibited.
Installing this product requires experience and specialized skills; attempting to install the
product by yourself exposes you to the risk of fire and/or electrical shock. Please contact your
vendor for installation.
· Do not install the product on a structurally unsound surface.
The product may detach from the surface and fall down.
The following section contains vital information that helps protect the safety of the user
and prevent property damage/loss. Please read it carefully for safe and proper use of
your product.
This warning symbol indicates death, grave personal injury, and/or damage
to property as consequences for failure to comply.
This caution symbol indicates damage to the equipment, installed programs,
and/or contained data as consequences for failure to comply.
This symbol indicates an informative appendix to a certain section of this
user’s manual.
Legend: Warning and Caution Symbols
