Appendixes
155
Error messages
When the following error messages appear, try these remedies.
Error message
Suggested remedies
DCF Full Error
This message appears either when a file name
on the memory card reached the last number
of DCF standards or when the number of saved
files exceeds 1,000. Transfer the files from the
memory card to your computer and format the
card. Then, open the Settings menu and select
File No.
→
Reset
. (p. 152)
Device
disconnected.
Network connection disconnected while
transferring photos. Select a TV Link device
again.
File Error
Delete the damaged file or contact a service
center.
File system not
supported.
Your camera does not support the FAT file
structure of the inserted memory card. Format
the memory card on the camera.
Initialization failed.
•
Turn on TV Link enabled devices on the
network.
•
The camera has failed to locate a TV Link-
enabled device.
Invalid password.
The password for transferring files to another
camera is wrong. Enter the correct password
again.
Low Battery
Insert a charged battery or recharge the battery.
Memory Full
Delete unnecessary files or insert a new memory
card.
Error message
Suggested remedies
Card Error
•
Turn off your camera, and then turn it on
again.
•
Remove your memory card, and then insert
it again.
•
Format your memory card.
Card Locked
You can lock an SD, SDHC, or SDXC card to
prevent files from being deleted. Unlock the card
when shooting.
Card not
supported.
This message appears when the memory
card is not compatible or has an unsupported
capacity. Insert a SD, SDHC, or SDXC memory
card.
Connection failed.
•
The camera cannot connect to the network
using the selected access point. Select
another AP and try again.
•
The camera has failed to connect to the other
camera. Try connecting again.