Samsung SDR-3102, Быстрый старт

Страница: 162 / 242

English-4
7.
If the connection does not establish, check all cable connections
and go to step 2.1 and select <
Repair >.
On the “ Local Area Connection Status ” window, click
< Support > tab and check < Default Gateway > if matches to the
one found in the [ cmd.exe ], and check the connection again.
Step 3. Connecting DVR to the router
Step 3.1 Configuring DVR router setup
1.
Press the [ MENU ] button on the remote control.
2.
Use the left/right button (◄►) to select < Network >.
Network menu is selected.
3.
Use the up/down buttons (▲▼) to move to < Connection Mode >, and
press [ ENTER ] button.
4.
Select < Interface >.
A window of connection mode setup appears.
5.
Use direction buttons (▲▼◄►) to move to a desired item.
6.
Enter the < IP address >.
The IP address consists of 4 fields, and the first 3 fields should be same to those of < Default Gateway > address of
your computer which can be found in Step 2, and the last field should be unoccupied number (between 2 and 254).

ex) IP : 192.168.1.200
7.
Enter the < Gateway > and < Subnet Mask > as same to those of your computer found in Step 2.
8.
Set the < Device Port > and < HTTP Port >.
Set the Device Port and HTTP Port by referring to next page.
Connection Mode
Interface
Port
x IP Type Static
x Transfer Bandwidth 2Mbps
OK Cancel
x IP Address 192.168.1.200
x Gateway 192.168.1.1
x Subnet Mask 255.255.255.0
x
DNS Manual 168.126.63.1
Connection Mode
Port
Interface
x
Protocol Type TCP
x Device Port 4520 ~ 4524
x UDP Port 8000 ~ 8160
x Unicast/Multicast Unicast
x Multicast IP Address 224.126.63.1
x Multicast TTL 5
x HTTP Port 80
x Secure Video Transmission ON OFF
* Multi Browser Support:
Device Port 4505~4530, HTTP Port 80
OK Cancel