manualshive.com logo in svg

Samsung SCX-6320F, Руководство по обслуживанию

Поделиться
Скачать
Samsung SCX-6320F Скачать руководство пользователя страница 44

Service Manual

Summary of Product

4-22

Samsung Electronics

4.4.11  Receive Mode

The SCX-6320F provide following 3 fax receive modes: TEL, FAX, ANS/FAX.

In TEL mode, automatic fax reception is turned off. You can receive a fax only by external phone command (*9*)
or pressing the OHD key and pressing the START key.

In FAX mode, the machine answers an incoming call and automatically goes into receive mode.

In ANS/FAX mode, the an answering machine connected to the SCX-6320F via the EXT socket is allowed to
answer an incoming call, and the caller can leave a message on the answering machine. If the SCX-6320F 
senses a fax tone on the line, the call automatically switches over to the SCX-6320F.

4.4.12  Fax Feature

The Machine supports various fax functions. It supports Delay Transmission and Memory Transmission.

For urgent faxes which require to be sent during group transmission, the user can interrupt the process using the
Priority transmission function

The SCX-6320F supports receiving mailboxes by using ITU-T Sub addressing method.

See below for details of each functions.

4.4.12.1 Delayed/Memory Transmission

A maximum of 50 transmission jobs can be reserved in the SCX-6320F. The SCX-6320F will send a fax at a later
time when you will not be present. Using the Forced Memory Transmission option, documents are automatically
stored in memory and sent to a remote station.

4.4.12.2  Priority Transmission

When priority transmission is enabled, a high priority document can be transmitted ahead of reserved operations.
The document is scanned into memory, and then transmitted when the current operation concludes. Furthermore,
a priority transmission will interrupt a broadcast operation between stations or between redial attempts. 3 priority
jobs are available. It is not possible to send priority jobs to multiple locations

4.4.12.3  Polling Function

The SCX-6320F can be programmed to send documents in the user’s absence when polled and checking secure
code (Poll Code) function is supported. Only one setting for polled transmission jobs is available.

The documents to be polled should be stored in memory when setting polling transmission.

Transmission Poll reservation can be set for up to 5 different poll jobs.

Receive poll can be reserved for up to 50 Transmission jobs.

The user can add documents to a Delayed, or Polling transmission previously reserved in the SCX-6320F's 
memory. Also the user can cancel reserved jobs.

Содержание SCX-6320F

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды