Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA, Руководство по обслуживанию, Страница: 76 / 127

76
TROUBLESHOOTING
Error Code Part Display Criteria To check if the part is normal
or
F Comp over voltage
error
The error code is displayed when the
AC Input Voltage is too high.
Check the input voltage. (This error occurs when the
input voltage is AC 310V or higher.)
R Comp start failure
error
The error code is displayed when the
compressor has failed to start.
Check the soldering status of the inverter PCB. (Check
if any parts have short-circuited). Check if the DC 15V
output is less than 13.5V. Check the Comp and Cycle.
R Comp IPM fault error
The error code is displayed when
the compressor IPM fault error has
occurred.
R Comp location
detection error
This error code is displayed when an
abnormal current is detected in the
compressor. Check the compressor wire connections. Check the
soldering status of the inverter PCB. (Check if any parts
have short-circuited). Check the Comp and Cycle.
R Comp motor
constraint error
The error code is displayed when the
compressor motor is constrained.
Check if the compressor and the Cycle is normal.
Check the input voltage. Check the soldering of
the inverter PCB. (Check if any parts have short-
circuited.)
R Comp low voltage
error
The error code is displayed when the
AC Input Voltage is too low. Check the input voltage. (This error occurs when the
input voltage is AC 106 V or lower.)
R Comp over voltage
error
The error code is displayed when the
AC Input Voltage is too high. Check the input voltage. (This error occurs when the
input voltage is AC 310V or higher.)
Sparkling Tank
Overflow
Display error when open error is
detected by sparkling tank overflow :
separation of Sparkling Tank Overflow
Sensor housing part, contact error,
disconnection, short circuit.
The voltage of ASSY PCB KIT CN30- “1” CN30-”2”:
shall be over 4.5V
Water Supply to
Sparkling Tank Error
Display error when open error is
detected by water supply to sparkling
tank error : seperation of Sparkling Tank
Water Level Sensor housing part, contact
error, disconnection, short circuit.
The voltage of ASSY PCB KIT CN31- “1” CN31-”2”:
shall be over 4.5V