Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA, Руководство по обслуживанию, Страница: 123 / 127

123
REFERENCES
PROBLEM SOLUTION
The taste of the sparkling
water is too high.
• Decrease the Sparkling Level of the sparkling water.
(Sparkling Levels - 1: Low, 2: Medium, 3: High)
• Empty the sparkling water tank, and then set the Sparkling Level lower.
When the refrigerator makes sparkling water, it will make water at a
lower level of carbonation.
✽
To empty the sparkling water tank, press and hold the “Sparkling
Maker” button for 3 seconds to turn the Sparkling water maker
off. Dispense all the remaining sparkling water. After emptying the
sparkling water, press and hold the “Sparkling Maker” button for 3
seconds to activate the sparkling water maker.
✽
Did you make sparkling water by pressing the “Quick Sparkling/Fill
up” button and holding for 3 seconds? If there was still sparkling
water in the tank before you started the Quick Fill function, sparkling
water with a higher CO² concentration than the level you set can be
produced. Once the sparkling water tank is emptied, the refrigerator
will make sparkling water at the Sparkling Level you have set.
The taste of the sparkling
water did not change after
you changed the sparkling
concentration level.
• If you change the concentration level, the new level is applied to
the subsequent production. That is, the change does not affect the
sparkling water in the sparkling water tank nor does it affect the
sparkling water production currently in progress. The change is only
applied to subsequent productions.
After you replaced the
Sodastream Carbonator,
no sparkling water is being
produced.
• After replacing the SodaStream Carbonator, be sure to touch and
hold the “Quick Sparkling/Fill up” button for 3 seconds to reset the
SodaStream Carbonator.
The sparkling water
suddenly stops being
dispensed even though the
operation is still in progress.
• Check if the short lines inside the cup icon are turning on one by one
in a clockwise direction. This indicates that the sparkling water is being
produced. When production is complete, all of the short lines inside
the cup icon turn on. When production is complete, the refrigerator will
dispense sparkling water.
• If the refrigerator is not dispensing sparkling water, check if “OFF” is
displayed above the cup icon over the Sparkling Maker button.
• This indicates that the sparkling water tank is empty and the automatic
sparkling water production function is turned off. To produce sparkling
water, touch and hold the “Sparkling Maker” button for 3 seconds to
start production.
The Sparkling function is
turned off but sparkling
water continues to be
dispensed.
• Even if you turn off the sparkling water production function, sparkling
water is dispensed for as long as there is sparkling water in the
sparkling water tank.
• If you do not use the sparkling water maker for an extended period of
time, stop the automatic sparkling water production function and remove
the sparkling water through the dispenser.