Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA, Руководство по обслуживанию, Страница: 126 / 127

126
REFERENCES
PROBLEM SOLUTION
[Water temperature]
“We recommend that you only drink
sparkling water after it is sufficiently
cooled.”
• Since the temperature of the sparkling water greatly affects the taste of
the water, if the temperature of water is not sufficiently low, you may not
be able to get the right taste.
• We recommend you wait at least four hours after connecting tap water
to the refrigerator before making and dispensing sparkling water.
• We also recommend that when the refrigerator is producing sparkling
water, that you dispense as little regular water as possible so that the
sparkling water is produced with cold water.
• If you drink 0.5 gallons (2 liters) or more a day, the water may not be
cooled sufficiently.
• To store dispensed sparkling water, put the water in an air tight
container and keep it in a cold section of the refrigerator for better taste.
[CO
2
concentration of sparkling
water 1]
“To ensure a precise CO2
concentration, dispense all the
remaining sparkling water before
producing additional sparkling water.”
• Because the current system does not measure the CO2 concentration
of the sparkling water remaining in the sparkling water tank before it
starts to produce additional sparkling water, the resulting concentration
may differ from the desired level, depending on the remaining sparkling
water in the sparkling water tank.
• If you haven't used the sparkling water function for an extended period
of time (one week or longer), first remove all the sparkling from the
sparkling water tank, and then produce fresh sparkling water for better
quality and taste.
[CO
2
concentration of sparkling
water 2]
“To maintain a precise CO2
concentration of sparkling water,
replace the CO2 cylinder before it is
depleted.”
• As the time to replace the SodaStream Carbonator comes closer, the
CO2 concentration decreases and sparkling water becomes weaker.
• If the SodaStream Carbonator runs out of CO2, the cylinder icon ( )
turns on. If this occurs, replace the SodaStream 60L Carbonator with a
new one.
[Preparing sparkling water –
Capacity]
“If you want to have sufficient
sparkling water prepared in the
morning, we recommend that you
touch and hold the Sparkling Maker
button for 3 seconds to start the
sparkling water production before
going to bed."
• If you do not press and hold the “Sparkling Maker” button for
3 seconds to start the sparkling water production, the amount of
sparkling water in the water tank may be less than the maximum
production capacity of 1.1 liters.
• Since a production time of 10~30min is required if you need 1.1 liters or
more of sparkling water, we recommend producing and storing enough
sparkling water in advance or at least securing the maximum sparkling
water capacity of 1.1 liter by pressing and holding the “Sparkling Maker”
button for 3 seconds to start sparkling water production.
[The water supply pressure and
water taste
]
“If a water purifier is connected to the
refrigerator, we recommend that you
do not dispense water from the water
purifier less than five minutes before
you start a sparkling water production
cycle.”
• If water pressure to the refrigerator is low, check if the water line valve
is fully open and if the water line is kinked or bent.
• If a water purifier is connected to the refrigerator, there may be
insufficient water supply for sparkling water production.
• If there is insufficient water supply, the concentration of the sparkling
water increases or the amount of sparkling water may decrease.
8-5. Optimum Operating Environment for Sparkling water