Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA, Руководство по обслуживанию, Страница: 124 / 127

124
REFERENCES
PROBLEM SOLUTION
The sparkling water
dispenses at a slower rate
than regular water.
• Check if the tap water valve is closed or the hose is bent and if water
is being supplied to your home at the normal pressure. If the tap water
pressure is too low, the sparkling water maker may not work properly
because too little water is being supplied to the sparkling water tank.
• When water is supplied to the sparkling water tank from a water purifier,
sparkling water may not be produced properly because too much water
is required over a short period of time. We recommend that you do not
dispense water from a water purifier less than five minutes before you
start a sparkling water production cycle.
• If this problem continues, please contact the water purifier manufacturer
or ask a plumber to increase the tap water pressure to a normal level.
The sparkling water is not
cold enough and tastes flat.
• If you continuously produce a lot of sparkling water, you may not be
able to enjoy the true taste of sparkling water because there is too little
time to cool the water. To drink sparkling water at its optimal state, you
have to ensure sufficient cooling time before you dispense sparkling
water.
• We recommend you wait at least four hours after connecting tap water
to the refrigerator before making and dispensing sparkling water.
The sparkling “OFF” icon is
displayed, but the sparkling
water maker is not turned
off.
• Check if the short lines inside the cup icon are turning on one by one
in a clockwise direction. This indicates that sparkling water is being
produced and cannot be stopped immediately. However, if you press
and hold the “Sparkling Maker” button for 3 seconds during production,
then the “OFF” icon is displayed over the cup icon and automatic
sparkling water production will turn off after the current production cycle
is complete.
The concentration control
function is disabled during
sparkling water production.
• Check if the short lines inside the cup icon are turning on one by one
in a clockwise direction. This indicates that the sparkling water is being
produced. Since the sparkling water concentration cannot be changed
during a production operation, change the concentration level when
production is complete and the blinking stops. The refrigerator applies
the new Sparkling Level to the next production operation.
Sparkling water is produced
continuously.
• Has the sparkling water production time limit been reached?
The length of time during which sparkling water is generated is
determined by the Sparkling Level setting. (Level 1: Approx. 10 mins;
Level 2: Approx. 20 mins; Level 3: Approx. 30 mins)
Please wait until the sparkling water production time has been reached.
• Check if the refrigerator door is open.
If the refrigerator door is open, the sparkling water maker stops to
prevent noise that is generated by the sparkling water production.
If you open the door frequently, the time during which sparkling water is
produced may be extended depending on the Sparkling Level setting.
Close the refrigerator door and wait until the sparkling water production
time limit has been reached.