Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA, Руководство по обслуживанию, Страница: 57 / 127

57
DISASSEMBLY AND REASSEMBLY
4.
Lock the Cylinder into place by pressing the Lever.
• The inner pressure of the Cylinder may make it difficult to press the lever
down. Hold the lever as shown in the illustration on the right, and then push
down.
• If you don’t lock the cylinder into place, the refrigerator won’t produce
sparkling water.
• If the cylinder is not tightly connected to the Regulator, it will leak CO
2
gas,
producing a hiss. If this occurs, repeat Steps 2, 3, and 4, making sure that the
cylinder is firmly attached and locked into place.
5.
Press the Sparkling Maker button 3 seconds for Cylinder Reset function. Wait about 20 minutes. (the
amount of time needed for a medium level of carbonation) while the refrigerator makes sparkling water.
• To make sparkling water, the refrigerator injects CO2 from the CO2 cylinder into water stored in the
Sparkling Water tank. The water enters the tank through the refrigerator’s water supply line.
•
6.
To remove any residual substances that may be in the water, dispense 2 or 3 large glass fulls of
Sparkling Water and empty them into a sink.
For more information about using the Sparkling Water function, see Using the Sparkling
Water Function on page 58.