Voice SVC 43
Note:
Speaking clearly, say the command that you want to use. If VoiceSignal
does not recognize a command, it prompts you to repeat the
command. If VoiceSignal still does not recognized the command, it
tells you “
Sorry, no match found
” and cancels voice recognition.
Voice Command Tips
•
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
Voice Dialing Tips
•
Wait for the beep before speaking.
•
Speak clearly at a normal volume.
Dialing a Contact Name
1.
In Standby mode, press and hold
or
until “
Say
a command
” displays on the screen then say “
Call
”
followed by the Contact’s first and last name. Voice Dial
repeats the name and dials the number.
Note:
If Voice Dial is unsure of the name spoken a list of up to three names
displays and you are prompted with “
Did you say
?”Say
Yes
to confirm
the name displayed,
No
to hear the next name, or use the keypad to
select the correct name from the list.
If the recognized name has multiple numbers stored, Voice Dial
displays the possible choices and prompts with “
Which
number?
”
2.
Say “
Home
”, “
Work
”, or “
Mobile
”, and Voice Dial dials the
specified number.
3.
Press
to exit VoiceSignal without dialing.
Dialing a Number
1.
In Standby mode, press and hold
or
until “
Say
a command
” displays on the screen.
2.
Say “
Call
” followed by the phone number. Voice Dial
repeats the number and dials it.
Note:
If Voice Dial is unsure of the name spoken a list of up to three names
displays and you are prompted with “
Did you say
?”Say
Yes
to confirm
the name displayed,
No
to hear the next name, or use the keypad to
select the correct name from the list.
3.
Press
to exit VoiceSignal.
Voice Settings
䊳
In Standby mode, press
Menu
➔
Voice SVC
➔
Voice
Settings
.
Choice Lists
When Vsuite cannot recognize a name or number, it displays a
choice list of up to three possible choices, and prompts you to
confirm the correct one.
r580.book Page 43 Thursday, October 28, 2010 12:45 PM
