54 English
Maint
enanc
e
Catalytic enamel surface (applicable models only)
The removable parts are coated with dark grey catalytic enamel. They can be
soiled with oil and fat spattered by the circulating air during convection heating.
However, these impurities burn off at oven temperatures of 200 °C or above.
1.
Remove all accessories from the oven.
2.
Clean the interior of the oven.
3.
Select
Convection
mode with max temperature, and run the cycle for an hour.
Door
Do not remove the oven door unless for cleaning purposes. To remove the door for
cleaning, follow these instructions.
WARNING
The oven door is heavy.
1.
Open the door and flip open the clips at
both hinges.
2.
Close the door approximately 70°. Hold
the oven door by the sides using both
hands, and lift and pull upwards until
the hinges are removed.
3.
Clean the door with soapy water and a
clean cloth.
Maintenance
Cleaning
WARNING
•
Make sure the oven and accessories are cool before cleaning.
•
Do not use abrasive cleaning agents, hard brushes, scouring pads or cloths,
steel wool, knives or any other abrasive materials.
Oven interior
•
For cleaning the interior of the oven, use a clean cloth and a mild cleaning
agent or warm soapy water.
•
Do not hand-clean the door seal.
•
To avoid damaging the enamelled oven surfaces, only use standard oven
cleaners.
•
To remove stubborn soils, use a special oven cleaner.
Oven exterior
If there are fingerprints, grease, or stains on the exterior (such as the door surface,
handle, or display), clean with a soft cloth with a glass cleaner or neutral detergent,
and then wipe dry with a soft, clean, dry cloth.
Grease and dirt can remain, especially around the handle because of the hot air
coming from inside. It is recommended to clean the handle after each use.
Accessories
Wash the accessories after every use, and dry it with a tea towel. To remove
stubborn impurities, soak the used accessories in warm soapy water for about
30 minutes before washing.
NV75T8879RK_EU_DG68-01258C-00_EN.indd 54
2020-02-26 11:44:57
