147
Q
During the wireless Ad-Hoc network operation,
the AP (Access Point) is intermittently not
found.
A This problem occurs intermittently during the
wireless Ad-Hoc network operation. Even if this
problem occurs, the wireless Ad-Hoc network
operation is working properly and is not affected.
Click Refresh to update the AP list.
Q
I have set the same IP address for both the
wireless and wired connections, but they do not
work properly.
A You cannot use wireless and wired connections
using the same IP address. To sequentially use
both the wired and wireless connections with the
same IP address, you need to set the currently not
needed connection to Do Not Use in the Network
Connections of the Control Panel.
Q
The wireless LAN does not work properly when
there is a device operating on an adjacent
frequency in the vicinity of the product.
A1 Channel interference may occur when a wireless
video transceiver or a microwave oven is being used.
If you experience channel interference from other
equipment, we recommended changing the channel
for connecting to the AP. For more information about
AP settings, refer to the User Manual supplied by the
AP manufacturer.
A2 Since IEEE802.11g equipment operates in hybrid
mode when there is active IEEE802.11b equipment,
the data rate may be degraded.
