Understanding Your Contacts 38
• Lock
/
Unlock
— Prevents/allows deletion of the selected
number.
• Erase all
— Deletes all numbers from the selected Calls log.
• View Timer
— Shows the call times for the Last Call, Home
Outgoing, Home Incoming, Roaming Calls, All Calls, Last Reset,
and Lifetime Calls timers for the selected Calls log.
4.
Select
Save
. The following options appear in the display:
• Create New
— Lets you create a new Contacts entry.
• Update Existing
— Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
For more information on saving the number, see
“Saving a
Number from a Call”
on page 36.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal
Contacts
command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note:
The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1.
In standby mode, press and hold
to launch
VoiceSignal
.
“
Say a Command
” appears in the display and is
pronounced through the speaker.
2.
Say “
Lookup
”.
VoiceSignal prompts you to “
Say the name.
”
3.
Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
•
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “
Did you say?
” followed by the first name on the list.
4.
Say “
Yes
” to confirm the name or “
No
” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to
“Choice Lists”
on
page 97.)
•
To say the name again, press the
Repeat
soft key.
•
To exit VoiceSignal without dialing, press
or
.
5.
The contact information for the name you selected appears
in the display.
