Samsung MR-DH00, Технический справочник

Страница: 30 / 197

Control Systems
30
I I
Individual control systems
3. Wired remote controller
4) Option function
MWR-SH00N
f
How to set
S ervice mode
1BHFEJTQMBZ
Press for more than 3
seconds simultaneously
<4FSWJDFNPEFTDSFFO>
Main Menu
Sub Menu
Up
Down
3JHIU
Save Exit
Left
Main
menu
4VC
menu
Function Default value
1BHF
in use
3BOHF
0
1
Reset
Reset the option setting of the wired remote
controller to dafault value
0 1 0 - Disable, 1 - Reset
2 Reset wired remote controller to factory default 0 1 0 - Disable, 1 - Reset
3 Power Master Reset 0 1 0 - Disable, 1 - Reset
4 Addressing Reset 0 1 0 - Disable, 1 - Reset
1
1
Wired
remote
controller
information
Check the number of connected indoor units 0 1 0~16
2
$IFDLUIFOVNCFSPGDPOOFDUFE&37
0 1 0~16
3
Check the MICOM code of wired remote
controller
none 1~3 MICOM code
4
Check the software version of the wired remote
controller
none 1~3 Updated date
2
1
"EESFTT
option
setting
5BSHFUJOEPPSVOJUBEESFTTTFUUJOHTFUUJOH 7JFX.BTUFSJOEPPSVOJU
1~3
Select address from one of the connected
indoor unit
Display example)
Page 1: 20 (Refers to indoor unit)
Page 2: 00 (Outdoor unit addres)
Page 3: 04 (Main address)
2 $IFDL4FUNBJOBEESFTT
Main address of
5BSHFUJOEPPSVOJU
1
Main address
(00H~4FH, Hexadecimal digits)
3 $IFDL4FU3.$BEESFTT
Main address of
5BS
get indoor unit
1
3.$ _'3.$ _'
(Hexadecimal number)
1)
7
4 $IFDLTFUUIFQSPEVDUPQUJPO
Product option of
target indoor unit
1~10 Option code
5 $IFDL4FUJOTUBMMBUJPOPQUJPO
Installation option
of target indoor unit
1~10 Option code
6 $IFDL4FUJOTUBMMBUJPOPQUJPO
Installation option of
target indoor unit (2)
1~10 Option code
3
1
$IFDL4FU
view master
$IFDL4FUJOEPPSVOJUWJFXNBTUFS
7JFX.BTUFSJOEPPS
unit
1~3
Select address from one of the connected
indoor unit (hexadecimal number)
2 No function - 1~3 -
4
1
$IFDL
Set Mode
master
indoor unit
Check the address of the mode Master indoor
unit
none 1~3
Address of the mode Master indoor
units
2 Setting the mode Master indoor unit
2)
7
none 1 0- Not set, 1-Set, 2-Cancel
On
1BHF 1BHF 1BHF 1BHF 1BHF
Auto Cool Dry Fan Heat
Off
1BHF 1BHF 1BHF 1BHF 1BHF
Auto Cool Dry Fan Heat
1)
7
When RMC(1) is set as F, RCM(2) can be set up to E only.
2)
7
.PEFNBTUFSJOEPPSVOJU5IFJOEPPSVOJUXIJDIDBOEFDJEFUIFPQFSBUJPONPEF0UIFSJOEPPSVOJUXJMMGPMMPXNPEFNBTUFSJOEPPSVOJUhTPQFSBUJPONPEF
SEG in use
1 2