Network setup
_ 33
Your machine appears on the
Printer List
, and is set as the default
machine.
18.
Click
Add
.
If the printer driver does not work properly, uninstall the driver and
reinstall it.
Follow steps below to uninstall the driver for Macintosh.
a) Make sure that the machine is connected to your computer and
powered on.
b) Insert the supplied software CD into your CD-ROM drive.
c) Double-click CD-ROM icon that appears on your Macintosh
desktop.
d) Double-click the
MAC_Installer
folder.
e) Double-click the
Installer OS X
icon.
f)
Enter the password and click
OK
.
g) The Samsung Installer window opens. Click
Continue
.
h) Select
Uninstall
and click
Uninstall
.
i)
When the message which warns that all applications will close
on your computer appears, Click
Continue
.
j)
When the uninstall is done, click
Quit
.
Linux
Install Linux Driver
1.
Make sure that the machine is connected to your network and
powered on. Also, your machine’s IP address should have been set.
2.
From the Samsung website, download the Unified Linux Driver
package to your computer.
3.
Right click the
Unified Linux Driver
package and extract the
package.
4.
Double click
cdroot
>
autorun
.
5.
The Samsung Installer window opens. Click
Continue
.
6.
The Add printer wizard window opens. Click
Next
.
7.
Select Network printer and click
Search
button.
8.
The Printer’s IP address and model name appears on list field.
9.
Select your machine and click
Next
.
10.
Input the printer description and Next
11.
When the add printer is done, click Finish
12.
When the install is done, click Finish
Add network Printer
1.
Double-click the
Unified Driver Configurator
.
2.
Click
Add Printer…
3.
The
Add printer wizard
window opens. Click
Next
.
4.
Select
Network printer
and click the
Search
button.
5.
The printer’s IP address and model name appears on list field.
6.
Select your machine and click
Next
.
7.
Input the printer description and
Next
8.
When the add printer is done, click
Finish
.
IPV6 CONFIGURATION
TCP/IPv6
is supported properly only in Windows Vista or higher.
If the IPv6 network seems to not be working, set all the network setting
to the factory defaults and try again. (See "Restoring factory default
settings" on page 31.)
To use the IPv6 network environment, follow the next procedure to use the
IPv6 address:
The machine is provided with IPv6 feature on.
1.
Connect your machine to the network with a network cable.
2.
Turn on the machine.
3.
Print a
Network Configuration Report
from the machine’s control
panel that will check IPv6 addresses.
4.
Select
Start
>
Control Panel
>
Hardware and Sound
>
Printers
>
Add
Printer
.
5.
Click
Add a local printer
on the
Add Printer
windows.
6.
Follow the instruction on the window.
If the machine does not work in the network environment, activate
IPv6. Refer to the next section followed by.
Printing network configuration report
You can print a
Network Configuration Report
from the machine's control
panel that will show the current machine’s network settings. This will help
you to set up a network and troubleshooting problems.
To print the report:
In ready mode, press and hold the
(cancel button) for about 5 seconds.
You can find your machine’s MAC address and IP address.
For example:
•
MAC Address : 00:15:99:41:A2:78
•
IP Address : 192.0.0.192
Setting IPv6 addresses
Machine supports following IPv6 addresses for network printing and
managements.
•
Link-local Address
: Self-configured local IPv6 address. (Address starts
with FE80.)
•
Stateless Address
: Automatically configured IPv6 address by a
network router.
•
Stateful Address
: IPv6 address configured by a DHCPv6 server.
•
Manual Address
: Manually configured IPv6 address by a user.
Manual address configuration
1.
Start a web browser such as Internet Explorer that supports IPv6
addressing as a URL. (See "Using SyncThru™ Web Service" on
page 24.)
For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the
address field and press the Enter key or click
Go
.
2.
When the
SyncThru™ Web Service
window opens, click
Network
Settings
.
3.
Click
TCP/IP
.
4.
Enable the
Manual Address
In the
TCP/IPv6
section.
5.
Select the
Router Prefix
and click the
Add
button, then the router prefix
will automatically be entered into the address field.
Enter the rest of address. (ex: 3FFE:10:88:194::
AAAA
. “A” is the
hexadecimal 0 through 9, A through F.)
6.
Click the
Apply
button.
