Network setup
_ 31
For example, 00:15:99:29:51:A8 becomes 0015992951A8.
•
IP Address
: Enter a new IP address for your printer.
For example, if your computer’s IP address is 192.168.1.150,
enter 192.168.1.X. (X is number between 1 and 254 other than
the computer’s address.)
•
Subnet Mask
: Enter a Subnet Mask.
•
Default Gateway
: Enter a Default Gateway.
6.
Select
Apply
, then
OK
, and
OK
again. The printer will automatically
print the configuration report. Confirm that all the settings are correct.
Quit Safari
. You may close and eject the installation CD-ROM. If
necessary, restart the computer’s firewall. You have successfully
changed the IP address, subnet mask, and gateway.
IP setting using SetIP Program (Linux)
SetIP program should be automatically installed during the printer driver
installation.
1.
Print the machine’s network configuration report to find your
machine’s MAC address.
2.
Open the /
opt
/
Samsung
/
mfp
/
share
/
utils
/.
3.
Double click the
SetIPApplet.html
file.
4.
Click to open the TCP/IP configuration window.
5.
Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click
Apply
.
When you enter the MAC address, enter it without a colon(:).
6.
The machine prints the network configuration report. Confirm all the
settings are correct.
7.
Close the SetIP program.
Network parameter setting
You can also set up the various network settings through the network
administration programs such as
SyncThru™ Web Admin Service
and
SyncThru™ Web Service
.
Restoring factory default settings
You may need to reset the machine to the factory default settings when
machine that you are using is connected to new network environment.
Restoring factory default settings using SyncThru™
Web Service
1.
Start a web browser such as Internet Explorer, Safari or Firefox and
enter your machine’s new IP address in the browser window.
For example,
2.
When the
SyncThru™ Web Service
window opens, click
Network
Settings
.
3.
Click
Reset
. Then, click
Clear
for network.
4.
Turn off and restart machine to apply settings.
INSTALLING NETWORK CONNECTED
MACHINE’S DRIVER
Windows
You can set up the machine driver, follow the steps below.
This is recommended for most users. All components necessary for
machine operations will be installed.
1.
Make sure that the machine is connected to the network and powered
on.
2.
Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation window
appear.
•
If the installation window does not appear, click
Start
and then
Run
.
Type X:\
Setup.exe
, replacing “X” with the letter which represents
your drive. Click
OK
.
•
If you use Windows Vista, Windows 7 and Windows 2008 Server R2
click
Start
>
All programs
>
Accessories
>
Run
.
Type X:\
Setup.exe
replacing “X” with the letter which represents
your drive and click
OK
.
•
If the
AutoPlay
window appears in Windows Vista, Windows 7 and
Windows 2008 Server R2, click
Run Setup.exe
in
Install or run
program
field, and click
Continue
or
Yes
in the
User Account
Control
windows.
3.
Select
Install now
.
If necessary, select a language from the drop-down list.
•
The
Wireless Setting and Installation
allows you to install a
wireless network to connect to the machine with USB cable.
(See "Setting a wireless network with USB cable" on page 2.)
•
The
Advanced Installation
has two options,
Custom
Installation
and
Install Software Only
. The Custom
Installation allows you to select the machine’s connection and
choose individual component to install. The Install Software
Only allows you to install the supplied softwares, such as
Smart Panel. Follow the guide on the window.
4.
Read
License Agreement
, and select
I accept the terms of the
License Agreement
. Then, click
Next
.
