Getting started
_ 25
Windows
You can install the machine software using the typical or custom method.
The following steps below are recommended for most users who use a
machine directly connected to your computer. All components necessary for
machine operations will be installed.
1.
Make sure that the machine is connected to the computer and powered
on.
If the “
Found New Hardware Wizard
” window appears during the
installation procedure, click
Cancel
in close the window.
2.
Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation window
appears.
•
If the installation window does not appear, click
Start
and then
Run
.
Type X:\
Setup.exe
, replacing “X” with the letter which represents
your drive. Click
OK
.
•
If you use Windows Vista, Windows 7 and Windows 2008 Server R2
click
Start
>
All programs
>
Accessories
>
Run
.
Type X:\
Setup.exe
replacing “X” with the letter which represents
your drive and click
OK
.
•
If the
AutoPlay
window appears in Windows Vista, Windows 7 and
Windows 2008 Server R2, click
Run Setup.exe
in
Install or run
program
field, and click
Continue
or
Yes
in the
User Account
Control
windows.
3.
Select
Install now
.
If necessary, select a language from the drop-down list.
•
The
Wireless Setting and Installation
allows you to install a
wireless network to connect to the machine with USB cable.
(See "Setting a wireless network with USB cable" on page 2.)
•
The
Advanced Installation
has two options,
Custom
Installation
and
Install Software Only
. The Custom
Installation allows you to select the machine’s connection and
choose individual component to install. The Install Software
Only allows you to install the supplied softwares, such as
Smart Panel. Follow the guide on the window.
4.
Read
License Agreement
, and select
I accept the terms of the
License Agreement
. Then, click
Next
.
The program searches the machine.
If your machine is not found in the network or locally, the following
window will appear.
•
Check if you want to install the software without
connecting the printer to the network or locally.
-
Check this option to install this program without a machine
connected. In this case, the print a test page window will be
skipped, and completes the installation.
•
Search again
When you press this button, the firewall notice window
appears;
-
Turn off the firewall and
Search again
. For Window
operating system, click
Start
>
Control Panel
>
Windows
Firewall
, and inactivate this option. For other operating
system, refer to its on-line guide.
-
Turn off the firewall from the third party's program beside
the operating system. Refer to the manual provided by
individual programs.
•
Direct Input
The
Direct Input
allows you to search a specific machine on
the network.
-
Search by IP address
: Enter the IP address or the host
name. Then click
Next
.