Samsung LN40A630M1F Скачать руководство пользователя страница 87

Страница: 87 / 107

English - 8

Troubleshooting for

Symptom

Solution

does not work.

Check if the device is an device. The system supports

devices only.

Connect only one receiver (home theater).

Check if the device power cord is properly connected.

Check the device’s Video/Audio/HDMI 1.3 cable connections.

Check whether (HDMI-CEC) is set to On in the setup menu.

Check whether the TV remote control is in TV mode.

Check whether it is exclusive remote control.

doesn’t work in certain situations. (Searching channels, Operating

WISELINK, Plug & Play, etc.)

When connecting or removing the HDMI 1.3 cable, please make sure to search

devices again or turn your TV off and on again.

Check if the Function of device is set on.

•

I want to start .

Check if the device is properly connected to the TV and check if the

(HDMI-CEC) is set to On in the Setup menu.

Press the TV button on the TV remote control to switch to TV. Then press the

TOOLS

button to show the menu and select a menu you want.

•

I want to exit .

Select View TV in the menu.

Press the

SOURCE

button on the

remote control and select a device other

than devices.

Press

CH LIST

PRE-CH

, and

FAV.CH

to change the TV mode.

(Note that the channel button operates only when a tuner-embedded

device is not connected.)

•

The message Connecting to

device... appears on the

screen.

You cannot use the remote control when you are configuring or

switching to a view mode.

Use the remote control when the setting or switching to view mode is

complete.

•

The device does not play.

You cannot use the play function when Plug & Play is in progress.

The connected device is not

displayed.

Check whether or not the device supports functions.

Check whether or not the HDMI 1.3 cable is properly connected.

Check whether (HDMI-CEC) is set to On in the setup menu.

Search devices again.

You can connect an device using the HDMI 1.3 cable only. Some HDMI

cables may not support functions.

If it is terminated by an abnormal situation such as disconnecting the HDMI cable

or power cord or a power failure, please repeat the device scan.

•

The TV program cannot be

recorded.

Check whether the antenna jack on the recording device is properly connected.

The TV sound is not output

through the receiver.

Connect the optical cable between TV and the receiver.

BN68-01669A-00Eng.indb 85

2008-06-13 ¿ÀÈÄ 7:13:18

Содержание LN40A630M1F












































































































Результаты поиска

Содержание LN40A630M1F

Отзывы:

Похожие инструкции для LN40A630M1F

Бренды по названию

Популярные бренды

Samsung LN40A630M1F, Руководство пользователя

Результаты поиска

Содержание LN40A630M1F

Отзывы:

Похожие инструкции для LN40A630M1F

Бренды по названию

Популярные бренды