English-112
Adjusting the Picture Quality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so
that it is aligned on the center of the screen.
1
Press the
SOURCE
button to select “PC”.
2
Press the
MENU
button. Press the
or
button to select “Setup”,
then press the
ENTER
button.
3
Press the
or
button to select “PC”, then press the
ENTER
button.
4
Press the
or
button to select “Image Lock”, then press the
ENTER
button.
5
Press the
or
button to select “Coarse” or “Fine”, then press the
ENTER
button.
6
Press the
or
button to remove the picture noise.
Select “Return” by pressing the
or
button, then press the
ENTER
button to return to the previous menu.
Press the
EXIT
button to exit.
This feature may change the width of the image. If necessary, adjust the position to center.
BN68-01047X-00Eng.qxd 8/29/06 2:02 PM Page 112
