CUSTOMIZING YOUR KEYSET
AME PASSWORD
This feature allows people using the AME feature to enable password protection.
This will prevent unauthorized people from listening to your messages being left.
The passcode is the same as your station passcode. This feature only applies if
there is a SVM card installed in the system and your keyset has a programmed
AME button.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
101
to turn on AME PASSCODE or
100
to turn it off.
•
Press
TRANSFER
to store your selection.
From the LCD:
•
Press
MENU
button.
•
Scroll to
CONFIGURATION
option and press
ENTER
.
•
Scroll to
STATION ON/OFF
and press
ENTER
—
OR
—you may dial
0
and
immediately enter the option.
•
Scroll to
AME
password and press
ENTER
to change status.
•
Press
CANCEL
to return to the Main Option Page—
OR
—press
END
to return
to the idle screen.
AUTO CAMP-ON
This option allows intercom calls to be automatically camped on, if possible, when
a busy station is called.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Press
081
to turn CAMP-ON on or
080
to turn it off.
•
Press
TRANSFER
to store your selection.
From the LCD:
•
Press
MENU
button.
•
Scroll to
CONFIGURATION
option and press
ENTER
.
•
Scroll to
STATION ON/OFF
and press
ENTER
—
OR
—you may dial
0
and
immediately enter the option.
•
Scroll to
AUTO CAMP-ON
and press
ENTER
to change status.
•
Press
CANCEL
to return to the Main Option Page—
OR
—press
END
to return
to the idle screen.
49
5012L.qxp 3/10/2005 10:47 AM Page 55
50
SELECT RING TONE
Each keyset user can select any one of eight ring frequencies.
•
While on-hook, press
TRANSFER
and then dial
111
.
•
Dial
1
–
8
or press the
UP
and
DOWN
keys to hear each tone.
•
When you hear the tone that you prefer, press
TRANSFER
to save it.
NOTE: Specific lines or stations may be programmed to ring with a different
tone than what you have selected for your keyset.
From the LCD:
•
Press
MENU
button.
•
Scroll to
VOLUME
option and press
ENTER
.
•
Scroll to
RING TYPE
and press
ENTER
—
OR
—you may dial
1
and immediate-
ly enter the option.
•
Scroll to
RIGHT/LEFT
to choose tone and press
ENTER
at the desired tone.
•
Press
CANCEL
to return to the Main Option Page—OR—press
END
to return
to idle screen.
CHANGE YOUR PASSCODE
From the factory, your station passcode is 0000. You can change your station pass-
code whenever you desire.
•
While on-hook, press
TRANSFER
and then dial
101
.
•
Dial your old passcode.
•
Dial a new passcode (must be four characters). You can use
0
–
9
.
•
Redial the new passcode to verify. If successful, you will hear two beeps. Four
beeps indicate an incorrect code. Reenter the code again.
•
Press
TRANSFER
to store the new passcode.
From the LCD:
•
Press
MENU
button.
•
Scroll to
CONFIGURATION
option and press
ENTER
.
•
Scroll to
PASSWORD
and press
ENTER
—OR—you may dial
1
and immediate-
ly enter the option.
•
Enter
CURRENT PASSWORD
, press
ENTER
.
•
Enter
NEW PASSWORD
and press
ENTER
.
•
Enter
NEW PASSWORD
again, for confirmation and press
ENTER
.
•
Press
CANCEL
to return to the Main Option Page—
OR
—press
END
to return
to idle screen.
5012L.qxp 3/10/2005 10:47 AM Page 56
Содержание iDCS 500 Release 2/OfficeServ
Страница 50: ...N O T E S N O T E S ...
