Samsung iDCS 500 Release 2/OfficeServ, Руководство пользователя

Страница: 9 / 50

11
• The [0]-[9] dial buttons are used to directly choose a menu, or sub menu
options.
• The [ENTER] button in the navigation button assembly is used when saving a
modification.
• The [MENU] button in the navigation button assembly is used to to display
the IP Setup Main Menu.
• The [END] button in the navigation button assembly is used when canceling
or editing the modification, or existing programming.
• The [CANCEL] button in the navigation button assembly is used to go back to
the previous screen or to delete the last digit of a displayed option value.
MENU STRUCTURE
The IP SETUP MENU is configured as follows:
1. INFORMATION
1. Version
2. Network
3. Load Option
4. MAC Address
(Note that Option 3 will be indicated only when setting the Manual IP)
2. NETWORK
1. Mode
2. IP
3. Netmask
4. Gateway
(Note that Option 2 will be indicated only when setting the Manual IP)
3. LOAD & UPGRADE
1. Load Option
2. Upgrade Program
3. Upgrade Bootrom
4. Format
4. SYSTEM
1. Password (Unused)
5. SERVER
1. Server IP
2. ID
3. Password
6. EXIT
5012L.qxp 3/10/2005 10:47 AM Page 17
NAVIGATING THE MENUS
When programming within various menu options, information can be entered via
the dial pad keys using [0]-[9] and [
✱
] dial keys, as well as utilizing the navigation
button assembly.
The button used for editing and their features are summarized below.
BUTTON FEATURES
Left and Right ......................To move a cursor (highlighted area) or to erase what is
entered.
Enter ........................................To save the current setting and end programming.
End............................................To cancel the current programming and return to the
Main Menu.
Cancel......................................To move back to the previous screen or delete the last
digit of the displayed option value.
[
✱
] ............................................To enter [.] between IP address fields.
[0]-[9] ......................................To enter numerical values.
SETTING THE NETWORK PARAMETERS
Utilize the following programming steps to program the ITP-5012L IP keyset to
operate within the users network.
Network Parameter Setup
From the Setup, Main Menu, select [2. Network] to
set or modify the network parameters. The LCD
will display the
Network (1/1) screen.
Press ENTER and you will see the Mode (1/2)
screen.
• If [1. Manual IP] is selected, the user must
enter the IP address, subnet mask, and gate-
way value for the customer network that the
5012L resides on.
• If [2. DHCP] is selected, the IP address, subnet
mask, and gateway value will be set to the
default values automatically. (Choose this
option only if a DHCP server is available on the
local network).
12
Network (1/1)
1.Mode
Mode (1/2)
1.Manual IP
2.DHCP
5012L.qxp 3/10/2005 10:47 AM Page 18