DIALING FROM THE OUTGOING /
INCOMING MENU
•
From the station idle screen, press the
MENU
button and select
P-BOOK
.
•
Select
DIALED Nos
or
RECEIVED Nos
from the submenu. These menus will
store the last thirty calls made to and from the station.
•
Press the select button on the display, associated with the number to redial or
use the
DIRECTION
or
SCROLL
button to move the cursor to the desired
number. Press the
ENTER
button to display the detailed information of the
number.
•
Press the
SEND
button to dial the number.
DIALING THE MOST RECENT OUTGOING /
INCOMING NUMBER
•
Press the
SEND
button. The most recent call (Internal or External) to or from
the station will be displayed.
•
Continue to press the
SEND
button and the system will automatically dial the
number for you.
MAKING CALLS FROM THE CALL LOG
The Station Call Log displays the last outgoing station, and incoming trunk calls.
The total number of calls that can be displayed is 60. You may redial any of these
calls from the Call Log.
•
Press the
SEND
button to display the first page of the
CALL LOG
.
•
Use the
SCROLL
button or the
DIRECTION
button to navigate to the desired
number. Use the
UP
and
DOWN
arrows, associated with the top left and right
soft keys to advance and return through the
CALL LOG
Screens.
•
When the desired number is highlighted, press the
SEND
button.
•
The number will be automatically dialed.
ANSWERING A CALL
•
Lift the handset and you are automatically connected to the ringing call.
See
Ring Preference under Customizing Your Keyset
—
OR
—press the
SEND
button
to automatically answer on the speakerphone.
•
While a call is ringing in, the display will indicate the type of call coming in
(station number and name, trunk number and name, etc.)
NOTES:
1.
If a call is flashing at your keyset but not ringing, you must press the flashing
button to answer.
17
5012L.qxp 3/10/2005 10:47 AM Page 23
18
2.
While a call is ringing in, press the
SCREEN
button to display the programma-
ble button screen. This will enable you to view and invoke any of the station
features that you may wish.
UNIVERSAL ANSWER
Outside lines may be programmed to ring a general alerting device. To answer
calls ringing this device, dial
67
—
OR
—press the
UA
button. This device can oper-
ate in any one of the six different ring plans.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before dialing.
RECALL DIAL TONE
•
Press the
NEW
button to disconnect your existing call, wait for dial tone and
then make a new call on the same line.
NOTE: If this button does not appear on your keyset, the
FLASH
button may be
programmed to recall dial tone.
SENDING A FLASH
While on an outside call, press the
FLASH
button to send a flash to the telephone
company. This is required for some custom calling features or CENTREX use.
NOTE: Flash is not available on an ISDN circuit.
BUSY LINE QUEUING WITH CALLBACK
If you receive a busy signal when you are selecting an outside line, this means that
the line or group of lines is busy.
•
Press the
CALLBACK
button, if programmed, or dial
44
, you will hear confir-
mation tone.
•
Press the
ANS/RLS
or
END
button.
•
When the line becomes free, the system will call you back.
•
Lift the handset or press the
SEND
button to answer, wait for dial tone and dial
the telephone number or speed dial number again.
NOTES:
1.
A callback will be canceled if not answered within 30 seconds. If you have set
a callback, the cursor associated with the
CALLBACK
button will be solid
black.
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before dialing.
5012L.qxp 3/10/2005 10:47 AM Page 24
Содержание iDCS 500 Release 2/OfficeServ
Страница 50: ...N O T E S N O T E S ...