45
light is lit will cause the keyset to return to handset mode and the light will
go out.
HOT KEYPAD
On your phone system your keyset’s keypad can be made “live” or “hot” so
that it is not necessary to lift the handset or press the
SPEAKER
key before
you begin dialing. Calls can be made and features activated by simply dial-
ing the C.O. line number, trunk group access code, intercom number or fea-
ture access code. To activate this feature:
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
031
to turn the Hot Keypad on or
030
to turn it off.
•
Press
TRANSFER
to store your selection.
KEY CONFIRMATION TONE
You can hear a short beep (confirmation tone) each time you press a button
on the dial pad. This tone can be turned on or off.
•
While on-hook, press
TRANSFER
and then dial
110
.
•
Dial
040
to turn tones off or
041
to turn tones on.
•
Press
TRANSFER
to store your selection.
REJOINING A PAGE
This feature allows you to hear the remaining portion of an ongoing internal
page after you return your keyset to idle. To enable this feature:
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
051
to turn this feature on or
050
to turn it off.
•
Press
TRANSFER
to store your selection.
RING PREFERENCE
This feature automatically answers ringing calls when you lift the handset or
press the
ANS/RLS
key. This method will always answer calls in the order
they arrived at your keyset. When you turn ring preference off, you must
press the flashing button to answer a call, allowing you to answer calls in the
order you choose.
• With the handset on-hook, press
TRANSFER
and then dial
110
.
• Dial
061
to turn ring preference on or
060
to turn it off.
• Press
TRANSFER
to store your selection.
idcs100_falcon.qxd 10/20/2004 12:42 PM Page 51
AUTO ANSWER CO CALLS
This option will allow CO calls that directly ring your phone to auto answer.
When a CO call arrives at your station and this option set for ON your phone
will sound two beeps, the same as when a screened transfer is completed,
and you will be connected to the CO call. In order for this option to work the
station must also be programmed for auto answer (see SET ANSWER
MODE).
• While on hook, press
TRANSFER
and then dial
110
.
• Dial
151
to turn Auto Answer CO on or
150
to turn it off.
• Press
TRANSFER
to store your selection.
NOTE: Outside lines must ring your station directly for the Auto Answer CO
to work. Lines ringing a station group will not cause your phone to Auto
Answer the call.
DISPLAY SPEED DIAL NAME
[iDCS 500 L/LE VERSION]
This option allows you to view the name associated with a speed dial num-
ber as it is dialed.
•
With you handset on-hook, press
TRANSFER
and then dial
110
.
•
Press
111
to turn
DISP SPDNAME
on or
110
to turn it off.
•
Press
TRANSFER
to store your selection.
CALLER ID REVIEW ALL
[iDCS 500 L/LE VERSION ONLY]
This feature allows display keyset users to review Caller ID information for
calls sent to their stations. This list can be from ten to fifty calls in a first in,
first out basis. The list includes calls that you answered and calls that rang
your station but that you did not answer. When reviewing this list, you can
press one button to dial the person back. The system must be using LCR to
dial the stored number.
•
With you handset on-hook, press
TRANSFER
and then dial
110
.
•
Press
121
to turn
CID REVIEW ALL
on or
120
to turn it off.
•
Press
TRANSFER
to store your selection.
46
idcs100_falcon.qxd 10/20/2004 12:42 PM Page 52