manualshive.com logo in svg

Samsung iDCS 28D, Руководство пользователя, Страница: 10 / 44

Поделиться
Скачать
Samsung iDCS 28D Скачать руководство пользователя страница 10

13

SECURING
SCREWS

REMOVE
KNOCKOUTS

ADDING A KEYSET 

DAUGHTERBOARD MODULE

•

Place the keyset face down on a flat surface.

•

Remove the base pedestal by placing your thumbs over the attachment
clips and press outward while simultaneously pressing down on the key-
set body with your fingertips.

•

Remove the two knockouts from the bottom of the keyset.

•

Plug in the daughter module and secure with the two screws provided.

idcs100_falcon.qxd  10/20/2004  12:42 PM  Page 19

14

OUTSIDE CALLS

MAKING AN OUTSIDE CALL

•

Lift the handset and press an idle outside line button, line group button
or dial a line access code to receive dial tone—

OR

—press an idle out-

side line button, line group button or dial a line access code to receive
dial tone through the speaker—

OR

—press

SPEAKER

, receive intercom

dial tone and dial a line access code.

•

Dial the telephone number.

•

Finish the call by replacing the handset or pressing the 

ANS/RLS

key.

NOTE: You will receive No More Calls tone when you attempt to make a call
and there is no key available for that line.

•

If Least Cost Routing is enabled on your phone system, this button may
be labeled 

LCR

or accessed by dialing an access code (usually 

9

).

•

If your system is programmed to require an authorization code before
making a call, dial 

4

plus a valid code before selecting a C.O. line. 

•

If your system is programmed to require an account code before mak-
ing a call, press the 

ACCT

button or dial 

47

plus a valid bin number,

press the 

ACCT

button again and then select a C.O. line.

For more information on authorization and account codes, see your system
administrator.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the 

SPEAKER

key before dialing.

ANSWERING AN OUTSIDE CALL

•

Lift the handset and you are automatically connected to the ringing call. 
See

Ring Preference under Customizing Your Keyset

—

OR

—press the

ANS/RLS

key to automatically answer on the speakerphone.

NOTE: If a call is flashing at your keyset but not ringing, you must press the
flashing button to answer.

UNIVERSAL ANSWER

Outside lines may be programmed to ring a general alerting device. To
answer calls ringing this device, dial 

67

or press the 

UA

key. This device can

operate in any one of the six different ring plans.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the 

SPEAKER

key before dialing.

idcs100_falcon.qxd  10/20/2004  12:42 PM  Page 20

Содержание iDCS 28D













































Отзывы:

Нет отзывов