manualshive.com logo in svg

Samsung iDCS 28D, Руководство пользователя, Страница: 22 / 44

Поделиться
Скачать
Samsung iDCS 28D Скачать руководство пользователя страница 22

ESTABLISHED CALL PICKUP 

[iDCS 500 L/LE VERSION]

To pick up an established call in progress at a single line extension con-
nected to a computer modem on your PC.

•

Press the 

EP

key for that station on your keyset and the call is automat-

ically moved to your keyset.

•

The single line extension on your modem will be disconnected.

NOTE: You must have an assigned (EP key) button on your regular keyset,
for the single line station.

APPOINTMENT REMINDER/ALARM
CLOCK

This feature works like an alarm clock. Use it to remind yourself of an ap-
pointment later in the day (TODAY ONLY) or as a daily reminder every day
(DAILY). You can set up to three alarms. Each one can be either a TODAY
ONLY or a DAILY alarm.

When the alarm rings, you will hear three short rings repeated three times.
Lift the handset to answer the alarm. If you do not, the alarm will alert you
two more times at five minute intervals. 

To set alarms:

•

Press 

TRANSFER

and then dial 

112

.

•

Dial the alarm number 

1

,

2

or

3

.

•

Dial the time at which you want the alarm to sound. Enter the time as
HHMM (hours and minutes) using the 24 hour clock.

•

Dial 

0

(NOT SET), 

1

(TODAY ONLY) or 

2

(DAILY) to select the alarm type.

•

Press 

TRANSFER

to save.

•

Repeat for each alarm if needed.

To cancel individual alarms:

•

Press 

TRANSFER

and then dial 

112

.

•

Dial alarm number 

1

,

2

or

3

.

•

Press the 

HOLD

key.

NOTE: Display keysets can show a reminder message. See 

Alarm Remind-

er Messages

under

Display Features

.

37

idcs100_falcon.qxd  10/20/2004  12:42 PM  Page 43

ANSWERING THE DOOR PHONE

When you are programmed to receive calls from a door phone:

•

You will receive three short rings repeated.

•

Lift the handset or press 

ANS/RLS

key. You are connected to the door

phone.

•

If an electric door lock release is installed, dial 

13

to unlock the door.

CALLING THE DOOR PHONE/ROOM
MONITOR

You may call the door phone and listen to what may be happening outside
or in another room.

•

Dial the extension number of the door phone.

•

You will be connected to the door phone and you can listen or have a
conversation.

•

If an electric door lock release is installed, dial 

13

to unlock the door.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the 

SPEAKER

key.

EXECUTIVE/SECRETARY HOT LINE

If programmed, an executive and a secretary can have a hot line between
them. When the executive station is in the DND mode, all of its calls will ring
the secretary station.

•

Either person can press the 

BOSS 

key to make a voice call to the other

station.

•

Using the hot line will override DND at the other station. This key will light
red when the other station is in use. 

To transfer a call to a Boss in DND:

•

Press the 

TRANSFER

key followed by the 

BOSS

key.

•

Wait for the 

BOSS

to answer to announce the call and hang up to com-

plete the transfer 

OR

•

Hang up to complete a blind transfer after pressing the 

BOSS

key.

38

idcs100_falcon.qxd  10/20/2004  12:42 PM  Page 44

Содержание iDCS 28D













































Отзывы:

Нет отзывов