BUSY STATION CALLBACK
When you call another station and receive a busy signal:
•
Press the
CBK
key, if programmed, or dial
44
.
•
When the busy station becomes free, your keyset will ring.
•
Lift the handset or press
ANS/RLS
to call the now idle station.
NOTES:
1.
A callback will be canceled if not answered within 30 seconds. If you
have set a callback, your
CBK
key will light.
2.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key before dialing.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want
to wait for a callback:
MANUAL CAMP-ON
•
Press the
CAMP
key or dial
45
.
•
The called station will receive off-hook ring tone repeated every few sec-
onds and its first available
CALL
button will flash green to indicate your
call is waiting.
•
Wait for the called party to answer.
•
The called station must release its first call or place it on hold before
answering your camp-on.
NOTES:
1.
If you receive No More Calls tone, that station has no available key to
accept your call. Hang up or leave a message.
2.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key before dialing.
AUTO CAMP-ON [iDCS 500 L VERSION ONLY]
When you want to automatically camp on to a busy station without pressing
the camp on button every time you call a busy station, you can set your
phone for auto camp-on.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
081
to turn on auto camp-on or
080
to turn it off.
•
Press
TRANSFER
to store your selection.
17
idcs100_falcon.qxd 10/20/2004 12:42 PM Page 23
CALLING YOUR SYSTEM OPERATOR
•
Dial
0
to call your system operator or group of operators.
•
If you want to call a specific operator, dial that person’s extension num-
ber.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPEAKER
key before you begin dialing.
18
idcs100_falcon.qxd 10/20/2004 12:42 PM Page 24