25
Charging the battery pack with the AC power adaptor
• The battery pack is not charged during the power saving mode, which may keep the mode
indicator on or flashing. Start charging the battery after turning off the camcorder by pressing the
power (
) button.
• Even with the power is switched off, battery pack will still discharge if the battery pack is left
inserted in the camcorder.
• It is recommended you to have one or more additional battery packs to allow continuous use of
your camcorder.
PRECHECK!
Before starting the following procedure, make sure that the battery pack is inserted in your camcorder.
1.
Press the power(
) button to turn off the camcorder and then close the LCD screen.
page 29
2.
Open the battery/memory card cover.
3.
Insert the battery pack in the camcorder.
4.
Connect the AC power adaptor to the DC IN jack on the camcorder and plug the AC power
adaptor in the wall outlet.
MODE
CHG
DC IN
AC power adaptor
OPEN
Power(
) button