Disassembly and Reassembly _ 31
Part
Figure
Description
Base
Preparation:
•
Disassemble the frame L/R and the shutter.
- Refer to each disassembly section.
1. Remove the eight (8) screws on the base plate both-
sides.
&DUHIXOO\OD\WKHGLVKZDVKHUGRZQRQLWVEDFN
3. Remove the cover PCB and pull out the case PCB
and disconnect the wire connectors.
4. Disconnect the wire connectors from Assy Sump.
3XOORXWWKHEDVHSODWHVOLJKWO\
6. Remove other parts as needed to remove the base.
([0DLQZLUHRVHV
ఐ
Reassembly is in the reverse order of the removal.